View GT5-1P-DS_538509.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
SAE/USCAR-19
Termination of coaxial cables in automotive, medical and instrumentation applications utilizes a single motion to crimp the center conductor, shield and outer insulation.
GT5 Series
-- Connectors for coaxial cables --
Features
USCAR Standard titled "Square Outer Conductor (SAE/USCAR-19)" excludes Water Proof type (GT5W) Cost efficient termination Highly efficient and reliable single motion "Twin Crimp TM " termination allows high volume production with semi-automatic equipment. Space-saving Design Lock-release latching system Shock / vibration resistant electrical connections Verification of the full contact insertion Color and polarizing variations Excellent High Frequency Performance Refer to V.S.W.R. data on the following pages.
Applications
In-car communication, car sensors (temperature, pressure), automotive audio systems, GPS antenna systems, RACS antenna audio/video antenna systems, CRT displays, medical and measuring instrumentation, variety of communication equipment, office automation equipment, LAN systems.
*"Twin Crimp "is a registered trade mark of Hirose Electric.
27
B Test Data (Using 1.5D-2V Type cable)
High Frequency Characteristics (V.S.W.R.)
Note: Typical data using fully assemblied and connected GT5-1S-HU and the GT5-1PP-HU.
B Termination sequence
1. Strip the cable. 2. Crimp the cable to the terminal.
3. Insert the terminal in the housing until is fully locked.
4. Fully insert the retainer.
28
Terminals for coaxial shielded cable F Connector Terminals
Part Number GT5-30/0.7-1.5SCF GT5-2428/1.6-2.5SCF GT5-30/1.6-2.9SCF GT5-2428/1.6-2.9SCF GT5-2022/1.6-2.9SCF GT5-2022/F2.7-3.5SCF
CL No. 755-0065-1 755-0078-3 755-0022-9 755-0002-1 755-0071-4 755-0077-0 755-0054-5 755-0016-6 755-0012-5 755-0034-8 755-0020-3 755-0024-4 755-0036-3
Conductor Size (AWG) #30 or equivalent #30 or equivalent #24 to 28 or equivalent #24 to 28 or equivalent #20 to 22 or equivalent #20 to 22 or equivalent #20 to 22 or equivalent #30 or equivalent #24 to 28 or equivalent #20 to 22 or equivalent #30 or equivalent #24 to 28 or equivalent #20 to 22 or equivalent
Inner Insulation Diameter 0.6 to 0.9mm 1.5 to 2.0mm
Outer Diameter
Packaging
1.4 to 1.8mm 1,300 pcs. per reel 2.3 to 2.7mm 1,300 pcs. per reel
1.5 to 2.0mm
2.6 to 3.4mm 1,300 pcs. per reel
2.4 to 2.9mm 2.5 to 2.9mm
3.3 to 3.7mm 1,100 pcs. per reel 3.6 to 4.0mm 1,100 pcs. per reel
* * * * * * *
GT5-2022/F3.3-3.8SCF GT5-30/3.3-5SCF GT5-2428/F3.3-5SCF GT5-2022/F3.3-5SCF GT5-30/F4-5SCF GT5-2428/F4-5SCF GT5-2022/F4-5SCF
2.5 to 2.9mm
4.6 to 5.0mm 1,100 pcs. per reel Part Insulator Material PBT Phosphor bronze Brass Finish Color: Dark gray Tin plating Tin plating
3.0 to 3.6mm
4.6 to 5.0mm 1,100 pcs. per reel
Crimp terminals Outer terminals
Note: Products marked with an asterisk (*) indicate polyethylene foam insulation.
M Connector Terminals
Part Number GT5-30/0.7-1.5PCF GT5-30/1.6-2.9PCF GT5-2428/1.6-2.9PCF GT5-2022/1.6-2.9PCF GT5-2022/F2.7-3.5PCF
CL No. 755-0017-9 755-0021-6 755-0001-9 755-0094-0 755-0076-8 755-0053-2 755-0015-3 755-0011-2 755-0033-5 755-0019-4 755-0023-1 755-0035-0
Conductor Size (AWG) #30 or equivalent #30 or equivalent #24 to 28 or equivalent #20 to 22 or equivalent #20 to 22 or equivalent #20 to 22 or equivalent #30 or equivalent #24 to 28 or equivalent #20 to 22 or equivalent #30 or equivalent #24 to 28 or equivalent #20 to 22 or equivalent
Inner Insulation Diameter 0.6 to 0.9mm
Outer Diameter 1.4 to 1.8mm
Packaging 900 pcs. per reel
1.5 to 2.0mm
2.6 to 3.4mm
900 pcs. per reel
2.4 to 2.9mm 2.5 to 2.9mm
3.3 to 3.7mm 3.6 to 4.0mm
900 pcs. per reel 900 pcs. per reel
* * * * * * *
GT5-2022/F3.3-3.8PCF GT5-30/F3.3-5PCF GT5-2428/F3.3-5PCF GT5-2022/F3.3-5PCF GT5-30/F4-5PCF GT5-2428/F4-5PCF GT5-2022/F4-5PCF
2.5 to 2.9mm
4.6 to 5.0mm
900 pcs. per reel Part Insulator Material PBT Brass Brass Finish Color: Dark gray Tin plating Tin plating
3.0 to 3.6mm
4.6 to 5.0mm
900 pcs. per reel
Crimp terminals Outer terminals
Note: Products marked with an asterisk (*) indicate polyethylene foam insulation.
Low-insertion M Connector Terminals
Part Number GT5L-30/0.7-1.5PCF GT5L-30/1.6-2.9PCF GT5L-2428/1.6-2.9PCF GT5L-2428/1.6-2.5PCF
HRS No. 755-0068-0 755-0067-7 755-0066-4 755-0079-6
Conductor Size (AWG) #30 or equivalent #30 or equivalent
Inner Insulation Diameter 0.6 to 0.9mm
Outer Diameter 1.4 to 1.8mm
Packaging 900 pcs. per reel Part Insulator Material PBT Brass Brass Finish Color: Dark gray Tin plating Tin plating
#24 to 28 or equivalent 1.5 to 2.0mm #24 to 28 or equivalent
2.6 to 3.4mm
900 pcs. per reel
Crimp terminals Outer terminals
29
For Single-Conductor coaxial shielded cable F Connectors
Housing
BKeying Configurations
Figure q
Figure w
Figure e
Figure r
Figure t
Figure y
GT5-1S-HU
Figure u
Part Number GT5-1S-HU GT5-1S-HU(A) GT5-1S-HU(B) GT5-1S-HU(C) GT5-1S-HU(D) GT5-1S-HU(E) GT5-1S-HU( I ) GT5-1S-HU(J) GT5-1S-HU(K) CL No. 755-0004-7 755-0037-6 755-0038-9 755-0080-5 755-0081-8 755-0082-0 Note 1 Note 1 Note 1 PBT Material Color Light gray Brown Green Blue Purple Pink Black Cream white Pastel orange Key polarizing Corresponding M Connector code Housing- In-line Figure q Figure w Figure e Figure r Figure t Figure y Figure u Figure i Figure o GT5-1PP-HU GT5-1PP-HU(A) GT5-1PP-HU(B) GT5-1PP-HU(C) GT5-1PP-HU(D) GT5-1PP-HU(E) GT5-1PP-HU( I ) GT5-1PP-HU(J) GT5-1PP-HU(K) Corresponding M Connector USCAR-19 Assembly- Board Mounting Coding GT5-1P-DS GT5-1P-DS(A) GT5-1P-DS(B) GT5-1P-DS(C) GT5-1P-DS(D) GT5-1P-DS(E) GT5-1P-DS( I ) GT5-1P-DS(J) GT5-1P-DS(K) A B C D E I J K
Figure i
Figure o
BShown with inserted retainer.
Retainer
Terminal extraction tool: GT-PO(A), Note 1: concept only
Retainer (-Optional-Used with the housings: GT5-1S-HU, GT5-1PPHU, GT5N-1PP-HU, GT5H-1PP-HU, and GT5-1PB-HU)
Part Number GT5-1P/S-R
CL No. 755-0006-2
Material PBT
Color Dark gray
Housing (Not requiring use of the retainer)
GT5R-1S/ HU
Part Number GT5R-1S-HU CL No. 755-0047-0 Material PBT Color Light gray
Terminal extraction tool: GT-PO(A)
30
BKeying Configurations
M Connectors
Housing
Figure q Figure w Figure e
Mounting bracket attachment side
Figure r
Outside ground connection
Figure t
Figure y
Figure u
Figure i
Figure o
BShown with inserted retainer.
Part Number GT5-1PP-HU GT5-1PP-HU(A) GT5-1PP-HU(B) GT5-1PP-HU(C) GT5-1PP-HU(D) GT5-1PP-HU(E) GT5-1PP-HU( I ) GT5-1PP-HU(J) GT5-1PP-HU(K) CL No. 755-0005-0 755-0039-1 755-0040-0 755-0103-9 755-0104-1 755-0105-4 Note 1 Note 1 Note 1 Corresponding F Connector Housing GT5-1S-HU GT5-1S-HU(A) GT5-1S-HU(B) GT5-1S-HU(C) GT5-1S-HU(D) GT5-1S-HU(E) GT5-1S-HU( I ) GT5-1S-HU(J) GT5-1S-HU(K) Color Light Gray Brown Green Blue Purple Pink Black Cream white Pastel orange Key polarizing USCAR-19 code Coding Figure q Figure w Figure e Figure r Figure t Figure y Figure u Figure i Figure o A B C D E I J K Part Housing Ground terminal Material PBT Phosphor bronze Finish Color: Dark gray Tin plating
Retainer
* Refer to pages 32 and 34 for panel brackets used with in-line connectors. * Terminal extraction tool: GT-PO(A) Note 1: concept only
Housing (For use with H type mounting bracket)
BFully mated connector assemblies.
Part Number GT5H-1PP-HU (10) GT5H-1PP-HU (41)
CL No. 755-0093-7 10 755-0093-7 41
Color Light Gray Blue
Corresponding F Connector Housing GT5-1S-HU GT5R-1S-HU
Housing (For use with N type mounting bracket)
BFully mated connector assemblies.
Part Number GT5N-1PP-HU
CL No. 755-0090-9
Color Light Gray
Corresponding F Connector Housing GT5-1S-HU GT5R-1S-HU
31
Housings
[ Panel mounting, enhanced ] shielding configuration
BRecommended Panel Cut-out
BMounted and fully mated connector assemblies
Panel thickness:1.6
M3
Part Number GT5A-1PP-HU
CL No. 755-0025-7
Part Housing Ground terminal
Material PBT Brass
Finish Color: Light gray Tin plating
Note 1: Terminal extraction tool: GT-PO(A) Note 2: Retainer is optional. Note 3: Use mounting screws of M3 with nominal diameter 3L-6 (for a panel thickness of 1.6 mm).
BRecommended Panel Cut-out
BMounted and fully mated connectorassemblies
Part Number GT5P-1PP-HU
CL No. 755-0030-7
Part Housing Ground terminal
Material PBT Brass
Finish Color: Light gray Tin plating
Note 1: Terminal extraction tool: GT-PO(A) Note 2: Retainer is optional. Note 3: Use mounting screws of M3 with nominal diameter 3L-6 (for a panel thickness of 1.6 mm).
Panel thickness:1.6
1
32
BRecommended Panel Cut-out
BMounted and fully mated connector assemblies
Chassis
Assembly Diagram (1:1)
Part Number GT5B-1PP-HU
CL No. 755-0051-7
Part Housing Ground terminal
Material PBT Copper alloy
Finish Color: Light gray Tin plating
Note 1: Terminal extraction tool: GT-PO(A) with nominal diameter 3L-6 (for a board thickness of 1.6 mm). Note 2: Retainer is optional. Note 3: Use mounting screws of M3 with nominal diameter 3L-6 (for a panel thickness of 1.6 mm).
BRecommended Panel Cut-out
BMounted and fully mated connector assemblies
Chassis
Assembly Diagram (1:1)
Part Number GT5S-1PP-HU
CL No. 755-0050-4
Part Housing Ground terminal
Material PBT Copper alloy
Finish Color: Light gray Tin plating
Note 1: Terminal extraction tool: GT-PO(A) with nominal diameter 3L-6 (for a board thickness of 1.6 mm). Note 2: Retainer is optional. Note 3: Use mounting screws of M3 with nominal diameter 3L-6 (for a panel thickness of 1.6 mm).
33
Connector assembly, Printed Circuit Board Mounting Type
11.8
Figure q
Figure w
Figure e
3
Figure r
Figure t
Figure y
BDiagram of Mated Connector in Use
Figure u
Figure i
Figure o
BRecommended PCB Mounting Pattern
For outer conductor
Part Number GT5-1P-DS GT5-1P-DS(A) GT5-1P-DS(B) GT5-1P-DS(C) GT5-1P-DS(D) GT5-1P-DS(E) GT5-1P-DS( I ) GT5-1P-DS(J) GT5-1P-DS(K)
CL No. 755-0007-5 755-0041-3 755-0042-6 755-0083-3 755-0084-6 755-0085-9 Note 2 Note 2 Note 2
Color Light Gray Brown Green Blue Purple Pink Black Cream white Pastel orange
Key polarizing Corresponding F Connector M Connector-Board Type code Housing Figure q Figure w Figure e Figure r Figure t Figure y Figure u Figure i Figure o GT5-1P-DS GT5-1P-DS(A) GT5-1P-DS(B) GT5-1P-DS(C) GT5-1P-DS(D) GT5-1P-DS(E) GT5-1P-DS( I ) GT5-1P-DS(J) GT5-1P-DS(K) GT5-1S-HU GT5-1S-HU(A) GT5-1S-HU(B) GT5-1S-HU(C) GT5-1S-HU(D) GT5-1S-HU(E) GT5-1S-HU( I ) GT5-1S-HU(J) GT5-1S-HU(K)
For inner conductor
Outlines
Part Housing 0.65 x 1.1 Terminals Insulator Outer terminals
Material PBT Brass PBT Phosphor bronze
Finish Tin plating Dark gray Tin plating
Note1: Use mounting screws of M3 with nominal diameter 3L-6 (for a board thickness of 1.6 mm). Note2: concept only
34
Two-position type-Each Single-Conductor coaxial cable
F Connectors
Housing
BKeying Configurations
Figure q
Figure w
Figure e
Figure r
Part Number GT5-2S-HU GT5-2S-HU(A) GT5-2S-HU(B) GT5-2S-HU(C)
CL No. 755-0044-1 755-0059-9 755-0060-8 755-0097-8
Material
Color Light Gray
Key polarizing USCAR-19 code Coding Figure q Figure w Figure e Figure r D2 A2 B2 C2
Shown with inserted retainer.
PBT
Brown Green Blue
Note 1: Terminal extraction tool: GT-PO(A) Note 2: Used with separate retainer (GT-5-2P/S-R).
M Connectors
Housing[Panel Mounted Housing]
BRecommended Mounting Bracket dimensions.
Tin plating
BFully mated connector assemblies
BKeying Configurations
Part Number GT5-2PP-HU GT5-2PP-HU(A) GT5-2PP-HU(B) GT5-2PP-HU(C)
CL No. 755-0045-4 755-0063-6 755-0064-9 -
Color Light Gray Brown Green Blue
Key polarizing code Figure q Figure w Figure e Figure r Part Housing Ground terminal Material PBT Phosphor bronze
Figure q
Finish Tin plating
Figure w
Figure e
Figure r
Note: Used with separate retainer (GT-5-2P/S-R). Coding D2 at USCAR-19 is GT5-2PP-HU.
35
Housing
BDiagram of Mated Connector in Use
Part Number GT5N-2PP-HU
CL No. 755-0055-8
Material PBT
Color Light gray
Note 1:Terminal extraction tool: GT-PO(A) Note 2: Used with separate retainer (GT-5-2P/S-R).
Retainer - 2 position (Used with GT5-2S-HU, GT5-2PP-HU, and GT5N-2PP-HU)
Part Number GT5-2P/S-R
CL No. 755-0046-7
Material PBT
Color Dark gray
Housing
BKeying Configurations
Figure q
Figure w
Figure e
Figure r
BRecommended Board Mounting Pattern
Panel
BMounted and fully mated connector assemblies
For inner conductor
For outer conductor Board Thickness : 1.6mm
Part Number GT5-2P-DS GT5-2P-DS(A) GT5-2P-DS(B) GT5-2P-DS(C)
CL No. 755-0043-9 755-0061-0 755-0062-3 -
Material
Color Light Gray
Key polarizing USCAR-19 code Coding Figure q Figure w Figure e Figure r D2 A2 B2 C2
PBT
Brown Green Blue
GT5-2P-DS (D)
GT5-2P-DS (A)
GT5-2P-DS (B)
GT5-2P-DS (C)
Note: Use mounting screws of M3 with nominal diameter 3L-6 (for a board thickness of 1.6 mm). Coding D2 at USCAR-19 is GT5-2P-DS.
Recommended Panel Cut-out
36
Power Supply Terminals
F Connector Terminals
( For use with combination type assemblies: GT5-2/1S-HU, GT5-2/1P-DS, GT5-2/1PP-HU, GT5N-2/1PP-HU)
Part Number GT7-2022SCF GT7A-2022SCF
CL No. 757-0001-1 757-0003-7
Material Copper alloy
Finish Tin plating
Conductor Size (AWG) #20 to 22 #20 to 22
Outer Diameter 1.4 to 2.4mm 2.6 to 3.1mm
Packaging 5,000 3,000
Note 1: Sold by the reel. (See above table for number of Packaging.) Note 2: This component is used only with applicable HRS housings.
M Connector Terminals
Part Number GT7-2022PCF GT7A-2022PCF
CL No. 757-0002-4 757-0004-0
Material Brass
Finish Tin plating
Outer Diameter 1.4 to 2.4mm 2.6 to 3.1mm
Packaging 5,000 3,000
Note 1: Sold by the reel. (See above table for number of Packaging.) Note 2: This component is used only with applicable HRS housings.
37
Combinaton Type (Two Single-Conductor Coaxial Cables + One Power contact) F Connectors
Housing
BShown with inserted retainer.
Retainer
Part Number GT5-2/1S-HU
CL No. 755-0009-0
Material PBT
Color Light gray
Note 1:Terminal extraction tool: GT-PO(A) Note 2: Used with separate retainer (GT5-2/1S-R).
Retainer (exclusively for GT5-2/1S-HU)
Part Number GT5-2/1S-R
CL No. 755-0003-4
Material PBT
Color Dark gray
M Connectors
Connector assembly, Printed Circuit Board mounting
BRecommended Board Mounting Pattern
For power supply For inner conductor
For outside conductor
Thickness : 1.6mm
BRecommended Panel Cut-out
Part Housing 0. 64x1.1 Terminal Insulator Part Number GT5-2/1P-DS CL No. 755-0014-0 Outer terminal Tub terminal for DS 070
Material PBT Brass PBT Phosphor bronze Brass
Finish Color: Light gray Tin plating Dark gray Tin plating Tin plating
Board
Note: Use mounting screws of M3 with nominal diameter 3L-6 (for a board thickness of 1.6 mm).
38
M Connectors
Housing - with External Ground
BShown with inserted retainer.
Retainer
Mounting bracket attachment side
BRecommended Mounting Bracket Dimensions
min.
Outside ground connection
Part Number GT5-2/1PP-HU
CL No. 755-0008-8
Part Housing Ground terminal
Material PBT Phosphor bronze
Finish Color: Light gray Tin plating
Tin plating finish
Note 1: Terminal extraction tool: GT-PO(A) Note 2: Used with separate retainer (GT5-2/1PP-R ).
Housing - without External Ground
Part Number GT5N-2/1PP-HU
CL No. 755-0013-8
Material PBT
Color Light gray
Note 1: Terminal extraction tool: GT-PO(A) Note 2: Used with separate retainer GT5-2/1PP-R and mounting bracket GT-BK or GT-BK (01).
Retainer (Used with GT5N-2/1PP-HU and GT5-2/1PP-HU)
GT5-2 / 1PP-R
Part Number GT5-2/1PP-R CL No. 755-0010-0 Material PBT Color Dark gray
39
4-Position - Single conductor Coaxial cable F Connectors
BShown with inserted retainer.
Part Number GT5-4S-HU
CL No. 755-0056-0
Material PBT
Color Light gray
USCAR-19 Coding D4
Note: Used with separate retainer (GT-5-4P/S-R).
M Connectors
Part Number GT5N-4PP-HU
CL No. 755-0057-3
Material PBT
Color Light gray
USCAR-19 Coding D4
Note 1: The product should be used with a low-force insertion/withdrawal M connector terminal. Note 2: Used with separate retainer GT-5-4P/S-R.
Retainer (Used with GT5-4S-HU and GT5N-4PP-HU)
Part Number GT5-4P/S-R
CL No. 755-0058-6
Material PBT
Color Dark gray
40
M Connectors
Connector assembly, Printed Circuit Board Mounting
Part Number GT5-4P-DS
CL No. 755-0087-4
USCAR-19 Coding D4
B Recommended Board Mounting Pattern
B Recommended Panel Cut-out
For inner conductors
For outer conductors
Panel Outline
PCB Board Outline
B Recommended Board and Panel installation
M3 Screw
Board
Panel
41
Single Conductor Coaxial Cable - Waterproof Type F Connectors
Housing
Part Number GT5W-1S-HU
CL No. 755-0027-2
Material PBT
Color Light gray
Note: Specific retainer is determined by the type of the cable used.
Retainer (Used with GT5W-1P-HU, GT5JW-1PP-HU, GT5W-1S-HU and GT5W-1P-HU)
Part Number GT5W-1P/S-R
CL No. 755-0028-5
Material PBT Silicon rubber Compound
Color Dark gray Dark gray
Note: Outer diameter of the cable must be within 2.9 to 3.4 mm. Consult nearest HRS representative for other diameters.
42
M Connectors
Housing
Part Number GT5W-1P-HU
CL No. 755-0026-0
Part Housing Connector seal
Material PBT Silicon rubber
Color Light gray White
Note: Use correct retainer.
Housing - Bracket Mounting
BMounted and fully mated connector assemblies BRecommended Bracket Dimensions
Part Number GT5W-1PP-HU GT5JW-1PP-HU
CL No. 755-0070-1 755-0069-2
A 1.5 3.2
B 1.3 3.0
Part Housing Connector seal
Material PBT Silicon rubber Compound
Color Light gray White
43
G Terminals For Direct Coaxial Cable Termination
BCompleted Termination cross section
1.5D-2V or equivalent
BBoard Termination Pattern
Lands
Part Number GTA-1.6CF
CL No. 755-0032-2
Material Brass
Finish Tin plating
Packaging 1,500 pcs. Per reel
BCompleted Termination cross section
1.5D-2V or equivalent
Pre-solder
Heat-shrink tubing
BBoard Termination Pattern
Part Number GTB-1.6CF
CL No. 755-0049-5
Material Brass
Finish Tin plating
Packaging 1,500 pcs. Per reel
BCompleted Termination cross section
1.5D-2V or equivalent
Heat-shrink tubing
BBoard Termination Pattern
Lands
Part Number G-1.6PCF
CL No. 755-0029-8
Material Brass
Finish Tin plating
Packaging 1,500 pcs. Per reel
44
For Direct Coaxial Cable Termination
BRecommended Board Termination Pattern
BCompleted Termination Cross Section
Lands
Pre-solder
Part Number GTA-0.7CF
CL No. 755-0074-2
Material Brass
Finish Tin plating
Packaging 1,500 pcs. Per reel
BRecommended Board Termination Pattern
BRecommended Completed Termination cross section
Lands
Part Number GTB-0.7CF
CL No. 755-0075-5
Material Brass
Finish Tin plating
Packaging 1,500 pcs. Per reel
For Mid-Cable Termination
Raised point of contact
BRecommended Panel Cut-out
BAttachment Diagram
Panel
Part Number GT-1.6PG-C
CL No. 755-0031-0
Material Brass
Finish Tin plating
Packaging
For use with coaxial cables 2.9 to 3.4 mm. outside diameter. Setscrew (M2.5)
1
45
Bottom Shield cover
For Improved Electronic Noise Compatibility
Mounted Condition Installed
Part Number GT5-1P/S-CSB CL No. 755-0048-2 Material Brass Finish Tin plating
Top Shield covers
Mounted Condition Installed
Part Number GT5C-1P-CSB CL No. 755-0088-7
46
Panel Mounting In-line Bracket
GT-BK GT-BK (01)
Part Number
CL No.
Material
Finish
Used with connectors
GT-BK
751-0039-6 SPCC
Tin plating
GT5-1PP-HU(A),GT5-1PP-HU(B),GT5-1PPHU(C),GT5-1PP-HU(D),GT5-1PP-HU(E),GT5-1PPHU(F),GT5-1PP-HU(G),GT5-1PP-HU(H),GT5-
GT-BK(01)
751-0039-6-01
Zinc plating
2/1PP-HU,GT5-2/1PP-HU(A),GT5-2/1PP-HU(A)
B Termination Tools
User's manuals are available. Please ask your Hirose Electric account representative.
Automatic crimping machine
Specifications
Item Specification Stroke length Number of strokes Weight Motor Crimping speed Specification 1.5tons 30mm 200spm(50Hz) 75kg 0.2kW 2000 to 4000pcs. Per day AC100V 200spm(60Hz) Remarks
Part Number CM-105
* Crimp height setting tables are available for each cable type. Please contact your nearest Hirose Electric account representative. Different cables will require different crimp height settings.
47

▲Up To Search▲

Price & Availability of GT5-1P-DS

	To Download GT5-1P-DS Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .